Economic Ioniser Twin Kit – Includes 1 Vortexer, 1 Negative Ion Hydrogen Water Bottle and electrolyte( Epsom salt )

Blood Ioniser Twin Kit – Includes 1 Vortexer, 1 Negative Ion Hydrogen Water Bottle and electrolyte

( Epsom salt 100g)

This economic version does not have a breathalizer application, and if you wish that set, please see the full kit in this shop for £135.  Or order the breathalizer application separately if you later decide to get one.

Water Twin Kit Instructions.

Use the Vortexer first and the hydrogen flask second.

Structured water is essential to our health. So firstly, add your preferred water* to the water vortexer. Press the start button on the vortexer and it will structure your water in 30 seconds and automatically turn itself off.

 

* if you are using distilled water, you MUST add a pinch conductive electrolyte* when vortexing it if you are going to use the hydrogen flask afterwards. Water used in the hydrogen flask must be conductive.  Distilled water is not conductive.

*Electrolyte is a salt such as Epson Salt,  or any non-chloride salt will do.

Once the vortexer has stopped add the structured water to the hydrogen flask. Do not seal the lid tightly on the hydrogen flask so that gas produced during this process can escape. This prevents any possible build-up of air pressure.

Press the start button on the hydrogen flask and a blue light will appear. Bubbles will appear in the water.  The unit will automatically turn itself off at 3 minutes.

 

This water is now ready to drink.

Note: hydrogenated water should be consumed within two hours as it slowly discharges.

Structured water will remain structured for up to a year. Do not place your drinking water near mobile phones, Wi-Fi units’ microwaves etc as this will degrade the quality.

 

Hydrogen Flask Instructions

Negative Ionizer Hydrogen Flask

 

Assembly/unpacking:

You will notice that the plastic tank is attached to the charging base.

• Remove it from the base and attach the base to the glass flask.
• Always use good quality water.
• Fill the ionizer flask to within 1 inch of the neck. Do not overtighten the lid – this prevents the flask from pressurizing.
• Press and release the start button. A blue light will turn on and after a short period you will see ionized gas bubbles rising. The flask will automatically turn off after three minutes.

If you are using distilled water, you will need to add a small pinch of electrolyte salt.

WARNING

Do not use Celtic or Himalayan salt or any other salt that contains chloride as this will produce chlorine gas which may be harmful.