4L Water Distiller Stainless Steel – Adjustable Temperature
- Pure Water Distillation: Produce distilled water using an efficient distillation process designed to remove impurities and provide clean, purified water.
- Adjustable Temperature Control: Set the operating temperature between 58°C and 108°C, allowing the distiller to be adjusted for different applications.
- Enhanced Safety Measures: Automatic shut-off activates when the temperature exceeds 160°C, with additional over-temperature protection for safer operation.
- Premium Construction: Manufactured using durable 304 stainless steel together with shock-resistant glass components for reliable everyday use.
- Easy to Clean: The distiller and glass collection jug have wide openings, making them easier to access for cleaning and routine maintenance.
- Energy Efficient: Uses approximately 3 kWh of electricity for one complete distillation cycle.
- Low Noise Operation: Designed for quiet operation, with fan noise measured at approximately 43–46 dB.
V8 – Hydrogen Kettle for 2 Litres of Warm and Cold Hydrogenated Water
The V8 Kettle is designed to be used after vortexing or structuring the water. It can be conveniently positioned on a kitchen worktop or counter, providing easy access to water for drinking, cooking and preparing hot drinks such as tea.
The accompanying jug provides a practical way to keep water available throughout the day. A tap positioned at the bottom makes dispensing the water simple and convenient.
The Frequency Device is supplied with its own stand and can be positioned beside the water jug. It is designed to help maintain the water at the desired frequency.
2 x Epsom Salt and 2 x pH Mineral Sticks to Help Maintain Optimum pH
This set contains Epsom Salt and pH Mineral Sticks for convenient everyday use. The combination is intended to complement your water routine, whether you are using the Epsom Salt for bathing and relaxation or the mineral sticks with your daily beverages.
Epsom Salt has traditionally been used in baths as part of relaxation and personal-care routines. The pH Mineral Sticks provide a convenient way of adding minerals to water and can be incorporated into your regular hydration routine.
Both products are simple to use and designed for convenience. The Epsom Salt dissolves readily in water, while the pH Mineral Sticks can be used with everyday drinking water according to the supplied instructions.
Hi-Tech Water – Vortexer
The Hi-Tech Water Vortexer is designed to vortex the water efficiently while also altering its texture and flow characteristics.
Once the vortexing process is complete, the water is ready for drinking or can be transferred to the hydrogen flask for further processing.
How do I use the Hi-Tech Water – Vortexer?
Remove the lid and fill the beaker to approximately half an inch below the top. Replace and screw on the lid securely.
Press the start button to begin the vortexing process. The rotor will start spinning and the unit will automatically switch off after 30 seconds.
The rotor operates at approximately 500 rpm. During a 30-second cycle, the water passes the magnets approximately 1,250 times, while it passes the pyramids approximately 2,500 times. The pyramids are cast using magnetite and shungite.
Here’s to GOOD HEALTH because at the end of the day “Only Results Count!”
Negative Ionizer Hydrogen Water Flask
This 420 ml hydrogen water flask combines food-grade borosilicate glass with 304 stainless steel to provide a durable and portable way to produce hydrogen-enriched water. It uses SPE and PEM electrolysis technology to process the water in approximately three minutes, separating hydrogen (H2) and oxygen (O2).
The flask is designed to produce up to 900 ppb of dissolved hydrogen. It provides a convenient way to prepare hydrogen water at home, at work or while travelling.
The rechargeable battery provides up to 10 uses from a full charge, with charging taking approximately 2–3 hours. Measuring approximately 21.5 × 7.5 cm and weighing around 500 g, the flask is compact enough for convenient everyday and travel use.
The flask is simple to operate and maintain. Fill it to approximately 85% capacity, press the button and allow the three-minute cycle to complete. The detachable design makes cleaning easier, while the silicone rubber seal helps prevent leakage. Keep the flask upright during use and transport, and rinse the base carefully without immersing it in water.
Hydrogen Flask Instructions
Assembly/unpacking:
- Always use distilled, structured and good-quality water.
- Fill the ionizer flask to within approximately 1 inch of the neck. Do not overtighten the lid, as this helps prevent pressure from building up inside the flask.
- Press and release the start button. A blue light will illuminate and, after a short time, ionized gas bubbles will begin to rise. The flask will automatically switch off after three minutes.
If you are using distilled water, add a small pinch of the Epsom Salt supplied with this kit.
WARNING
Do not use Celtic Salt, Himalayan Salt or any other salt containing chloride. Chloride can produce chlorine gas during electrolysis, which may be harmful.
Only use a small pinch of the Epsom Salt supplied with this kit.
Reviews
There are no reviews yet.